| |
*Energy saving, low running cost.
*Air-cooled / water-cooled modes selectable.
*Auxiliary heating by E-heater; Cooling /heating /dehumidify by compressor.
*The precision of the temperature and humidity can be set, it can satisfy different requirements.
*Intelligence selects modes of “Auto” “Summer” “Winter”
*Intelligence defrosts and forced defrost functions.
*System control of 0--10V silicon control E-heater.
*Support auto restart function, support terminal chain control.
*Trial run function; Memory function; Supply air temperature high, low protection; Probe fault protection.
*Strong stability, 0.15-80MHz interference rejection, 4KV high voltage and surge resistance
*SMT technology, 48 hrs burn-in test for ensuring quality
*MODBUS-RTU RS485 Widely-used communication protocol, up to 1km max distance (Gateway Free);
*PCB Surface painted with CRC, avoid leakage, short circuit, and erosion from acid/ alkali/ alcohol/ humidity/salt spray;
*Featured with tension and torsion resistance probe, long working life
*Wide voltage range, avoid misoperation caused by voltage fluctuation
*Control logic implemented on the control board. Continue working even HMI has fault.
|
|
| Temp. setting, Humidity setting, Temperature amendation, Humidity amendation, Summer mode start temp. Winter mode start temp. , Refer season changing, Energy adjust valve, PL delay, Compr. min running time, Compr. min stop time, Compressor start delay, Common alarm dalay, Temp.precision setting Humidity. precision setting, Auxiliary E-heater start up temp. , Condenser start temp (Heating) , Condenser start temp (Cooling) , Supply air temp high, Supply air temp low, Supply air temp diff. , Number of E-heater, No. of compressor, Heating mode, Input NO/NC, Defrost temp. diff, Defrost start up temp, Defrost min interval, Force defrost; |
| |
*Controller dimension: 222.6mm×158mm, fixed by 4 fixing holes (Hole dia:4.5mm), transverse hole distance 215mm, vertical hole distance 113.5mm;
*20 digital inputs;
*16 relay control outputs;
*8 analogue inputs
*2 analogue outputs
*Suitable for SL800 Text HMI, MT506 HMI
*Relay power output: 250V/5A;
*Transformer power output: 12V/1A.
|